tlbuiParticipanttlbui November 25, 2021 at 12:06 am
Kindly advise, whether or not SNR measurement values is provided, or any roadmap to include it in the RF mapping function of Spike?
Tuong LamAndrew November 28, 2021 at 6:57 am
There is no SNR measurement for the mapping functionality. Is there a certain type of signal you are trying to measure? Based on your other post, are you trying to perform a digital demodulation measurement to overlap on the map?
Henry WojtunikParticipantHenry Wojtunik December 3, 2021 at 9:17 am
Following this..In our case we would be measuring either digital P25 signals or FM modulated signals in a public Safety in-building coverage application. How can we measure CNR or SNR?Andrew December 6, 2021 at 8:25 am
Thanks for the feedback Henry.
As of right now only channel power measurements are available in the RF mapping mode. We will look into P25 in the future as this is a highly requested measurement. I don’t have a timeframe on this at this time.
tlbuiParticipanttlbui December 6, 2021 at 5:11 pm
Thank you, Andrew, for your reply.
Indeed, I want to show signal modulation type overlaid on the map. As such, an automated modulation measurement is likely required.
Tuong LamAndrew December 7, 2021 at 7:34 am
Thanks for the feedback Tuong.
You must be logged in to reply to this topic.