Showing all 24 results
- 100 kHz to 20 GHz range
- 160 MHz of instantaneous bandwidth
- 1 THz sustained sweep speed
- 110 dB of dynamic range
- Sub-octave preselector, 20 MHz to 20 GHz
- Perform insertion loss & return loss measurements
- Combo includes our BB60C and USB-TG124A devices
- 6 GHz directional coupler included
- Analyze insertion loss up to 6 GHz
- Combo includes our BB60C and USB-TG124A devices
- Analyze insertion loss up to 12.4 GHz
- Combo includes the USB-SA124B and USB-TG124A
- RF Frequency Range: 9 kHz to 6 GHz
- Wide dynamic range: -158 dBm to +10 dBm
- Instantaneous bandwidth of 27 MHz
- Up to 24 GHz/sec sweep speed (≥10 kHz RBW)
- RF Frequency Range: 100 kHz to 12.4 GHz
- Wide dynamic range: -151 dBm to +10 dBm
- Resolution bandwidths of 0.1 Hz to 250 KHz
- Includes a High Dynamic Range Measuring Receiver
- Perform insertion loss & return loss measurements
- Combo includes our USB-SA44B & USB-TG44A devices
- 6 GHz directional coupler included
- Test spectrum analyzer phase noise performance
- Clock ADC’s or DAC’s w/ ultra-clean sampling clock
- For fast prototyping or proof of concept design
- Analyze insertion loss up to 4.4 GHz
- Combo includes our USB-SA44B and USB-TG44A devices
- RF Frequency Range: 100 kHz to 12.4 GHz
- Amplitude range: -30 dBm to -12 dBm
- Up to 19 selectable frequency step sizes
- No external power supply needed
- RF Frequency Range: 1 Hz to 4.4 GHz
- Wide dynamic range: -151 dBm to +10 dBm
- Resolution bandwidths (RBW) of 0.1 Hz to 250 KHz
- Coverage: 5-3000 MHz
- Directivity rating of better than 40 dB
- Perfect for measuring VSWR
- Great for antenna work
- RF Frequency Range: 10 Hz to 4.4 GHz
- Amplitude range: -30 dBm to -10 dBm
- Step sizes from 10 Hz to 10 MHz
- -40 dBm to +10 dBm output power
- Easily generate analog, digital, and arb waveforms
- 1000+ simultaneous tones, 6 nanosecond pulses
- Built-in support for a number of modulation types
- (4) Probes for EMC pre-compliance measurements
- Locate and identify potential interference sources
- TBSWA2 / 40dB wideband amplifier included
- Every set includes a SMB to SMA cable (0.75m)
- Very Wideband: 50 to 6000 MHz
- 32 dB typ
- Perfect for defense, lab, or test/measurement use
- Bandwidth: 100 kHz to 12 GHz
- Internal 50 V DC Block
- 10:1 Voltage Ratio
- 12 GHz Telescopic Ground Clip
- Low Distortion, Passive RF Design
- Internal 50V DC Block
- Bandwidth: 100 kHz to 3 GHz
- Long flex life, triple shielded cable
- Phase & loss stable
- High mating cycle, stainless steel connectors
- Rugged, solder-clamp attachment
- Very Wideband: 1 to 2000 MHz
- 30 dB typ
- Rugged Shielded Case
- Protection against up to 2.5 W of input signals
- Wide frequency range, 30 MHz-6 GHz
- Very fast recovery time, 5 nsec typ.
- 20 dB Pad - 6 GHz
- DC Block - 8 GHz
- BNC-to-SMA Adapter - 2GHz
- Rugged unibody construction, small size
- Excellent power handling, 10W
- Temperature stable
SM200A — 20 GHz Real-time Spectrum Analyzer
$11900.00
Sale! 
6 GHZ Scalar Network Analyzer w/ Coupler for RL
$4251.66
Sale! 
6 GHZ Scalar Network Analyzer
$3955.66
Sale! 
12.4 GHZ Scalar Network Analyzer
$3098.18
BB60C — 6 GHz Real-time Spectrum Analyzer
$2879
USB-SA124B — 12.4 GHz Spectrum Analyzer
$1995
Sale! 
4.4 GHZ Scalar Network Analyzer w/ Coupler for RL
$1768.46
PNCS-1 Phase Noise Clock Standard
$1495
Sale!
4.4 GHZ Scalar Network Analyzer
$1472.46
USB-TG124A Tracking Generator
$1199
USB-SA44B — 4.4 GHz Spectrum Analyzer
$919
Return Loss Bridge — 5-3000 MHz – RLB254NF
$795
USB-TG44A Tracking Generator
$599
VSG25A Vector Signal Generator
$495
EMC Near-field Probe Set with 40 dB Wideband Amplifier
$449
Directional Coupler — 6 GHz – ZHDC-16-63+
$296
RF Probe – 12 GHz – P20B
$260
RF Probe – 3 GHz – P20A
$185
Times Microwave RF Cable, 18 GHz, 3ft length
$133.98
Directional Coupler – 2 GHz – ZFDC-10-5-S+
$110
Limiter – 30 MHz-6 GHz – VLM-63-2W+
$58
Accessory Kit – USB-SA44-ABA
$40
