- This topic has 1 reply, 2 voices, and was last updated 4 years, 2 months ago by
.
- Posts
SA44B is working fine with SCPI commands. But, I am facing some issues in span settings.
I want to check the frequencies with a 2GHz span.
When set to 2GHz span, peak tracking is not proper & suddenly the application is closing.
With a 100MHz span, it is working fine. But with 100 MHz, i need to change that parameter for every 100MHz and have to run the application.
So I want to set wider span or is there any API to move the peak to the center?
Can anyone suggest me a solution for this problem?
Can you describe what issues you are having with peak tracking? If you have a simple SCPI example that illustrates the application closing by setting a 2GHz span we can look into it and verify it is not a bug with the Spike software.
Otherwise, there is no issue setting a 2GHz span through SCPI. Any actions you take through SCPI commands should work identical as if you performed them with mouse/keyboard.
You must be logged in to reply to this topic.