dept911Participantdept911 April 11, 2016 at 12:57 pm
I imported a .csv limit file which worked fine. However, I don’t know how to clear it from the screen.
AndrewModeratorAndrew April 11, 2016 at 2:29 pm
See File->Import->Limit-Lines->Clear Limit Lines.
I think this will do the trick.
Let me know if you have any other questions.
dept911Participantdept911 April 12, 2016 at 4:43 am
Thanks for your rapid response. However, When I click on the following
File>Import>Limit Line Table
It opens a file window to open the .csv file for the limit lines. No apparent opportunity to clear limit lines.
AndrewModeratorAndrew April 12, 2016 at 8:57 am
I just realized that you are using the SignalHound 2.18D software. In that case there is no way to clear the limit line short of closing the software. I apologize for the inconvenience.
On the other hand, if you are interested, we have released a new software interface for our spectrum analyzers. It is called Spike, and can be downloaded for free here, http://www.signalhound.com/Spike. It can be installed along side your existing application. Going forward, it is what we recommend to new users. Along with many other additions, you can clear the limit lines in the software.
Let me know if you have further questions.
You must be logged in to reply to this topic.