AKalmanParticipantAKalman April 22, 2022 at 9:08 am
I am trying to connect Spike to an SA44 over USB on Ubuntu Linux on a Intel NUC, without success.
The SA44’s LED is green, and lsusb shows that the VCP FTDI drivers are happy and see the SA44.
I followed FTDI’s AN_220 to install the D2XX drivers through section 2.1.1, as well as SignalHound’s README.txt for the Spike install in Ubuntu, but I always get “No Signal Hound analyzer was detected.” etc. when launching Spike.
Is there some other App Note or tool I can use to verify that the D2XX drivers are loading properly?
AndrewModeratorAndrew April 22, 2022 at 9:16 am
The SA series spectrum analyzers are unfortunately not supported on Linux. Only the BB and SM spectrum analyzers are supported.
I apologize for the inconvenience.
AKalmanParticipantAKalman April 22, 2022 at 11:01 am
Well, that explains it!
You must be logged in to reply to this topic.