- mikeh June 11, 2020 at 10:05 am
Is there a way to save the Reference Level offset so that I don’t have to manually enter it each time is start Spike?Andrew June 12, 2020 at 8:40 am
Yes, the reference level offset is saved in presets. If you save a preset with your desired reference level offset, you can quick load it next time you launch the software using the ctrl+N shortcut.
Regardsmikeh June 12, 2020 at 8:51 am
Unless I am doing something wrong, this is not working for me. I set the Reference Level Offset in Settings, save it as part of my preset 2, close Spike, load preset 2, Reference Level Offset is back to 0.00db. Can you clarify.
THanks.Andrew June 12, 2020 at 9:27 am
If you are not currently using the latest version of Spike, is it possible you could update to determine if that is why this is not working for you? I am seeing success with this in Spike 3.5.5.
Regardsmikeh June 15, 2020 at 1:43 pm
I am using V3.5.6. Is there some config file that may be corrupt?Andrew June 15, 2020 at 2:08 pm
Which one of our spectrum analyzers are you using? I will try to reproduce this with your model specifically.
You must be logged in to reply to this topic.