not cleared traces from SNA in Sweep mode

[Ivan Ionov]

I usually collect several traces in SNA, record one trace, disable update of this trace, record next…

Then I switch Spike to Sweep mode, and all traces with unchecked “Update” remains on screen.

Also, I see simple bug – when I switch from Sweep to Zero span, center frequency always resets to 1GHz. Other modes remember center frequency.

• This topic was modified 9 years, 5 months ago by Ivan Ionov.

Attachments:

You must be logged in to view attached files.

Hi Ivan,

Thanks for the heads up on these. The Zero Span center frequency resets to 1 GHz each time you start the program. If you click the zero-span button on the control panel, it will use the current center frequency as the new center frequency for zero-span. Also, if you use the file menu to get to zero-span, it will use the last center frequency that was set in zero-span. Hope this helps.

Regards,
A.J.

[Author]

Posts