Measure Frequency Doubler responce in SNA mode ?

[Ivan Ionov]

Hello SG,

Is it possible to add option to measure frequency multipliers?
For example, this one –
http://www.rfbayinc.com/upload/files/fdr/fdr-4-8.pdf

I mean, to set TG output frequency divided by 2 (or 3, 4..) during SNA measurement process. For example set 1GHz in TG, and measure responce in 2GHz, set 1.1GHz and measure in 2.2GHz and so on…

I hope it can be very easy change in software.

Regards, Ivan

• This topic was modified 10 years, 11 months ago by Ivan Ionov.

You could do this manually, by setting the TG frequency and amplitude directly, rather than SNA mode, or even write a small application to automate this.

I would love to add a suite of tools to the SNA for doublers, triplers, mixers, etc. but we do not currently have these features available in Spike.

[Author]

Posts