- This topic has 1 reply, 2 voices, and was last updated 1 year, 9 months ago by
.
- Posts
I am attempting to use a BB60D to perform LTE RSRP mapping. The mapping function works flawlessly in the the channel power mode in conjunction with a USB GPS receiver. When switching to the LTE mode, the GPS tracking mode fails to update the proper position on the map or in the measurements table automatically based on distance traveled set via delta. I have verified that the LAT/LONG and the position is logged properly the first time the GPS tracking button is toggled. Each subsequent toggle of the GPS tracking button will update the measurements table with the current LAT/LONG, but does not update the position field.
Using Spike 3.8.7 64 bit, BB60D F/W 5, USB3 interface.
Computer is an i7-8550H, 16GB RAM, WIN10 PRO 64 bit 21H2.
Any ideas?
Hi SRobert,
This sounds like a bug in Spike. We can definitely look into this, and if we can reproduce/find it, we can get a fix into the next release. Can you reach out to us via email at support@signalhound.com? Just say that you are from this thread. That way we can contact you easily if we have follow up questions? I believe we will have time to look into this next week.
I appreciate your patience.
Andrew
You must be logged in to reply to this topic.