Linux Spike 3.5.4 Locks Up with Spans Less Than 500 kHz.

Found a possible issue Spike for Linux (ver 3.5.4). I was zooming in on a signal, dropping the span using the on-screen arrow keys. Everything was fine down to a span of 500 kHz. As soon as I dropped it one notch below 500 kHz (200 kHz), Spike froze. I tried it at several, different center frequencies. It was the same regardless of the center frequency.
I’m running on Linux Mint 19.3 Cinnamon, which I realize is not Ubuntu. Regardless, it’s working flawlessly otherwise.

Thank you for the bug report Gary. I will be looking into this shortly.

Just as some more information I can attach to this bug report, can you let me know what CPU is in this PC?

Surely. Here’s the information straight from the “System” report:
CPU: Topology: Quad Core model: Intel Core i7-6700 bits: 64 type: MT MCP arch: Skylake-S
rev: 3 L2 cache: 8192 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 54398
Speed: 800 MHz min/max: 800/4000 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800
5: 801 6: 800 7: 800 8: 800

[Author]

Posts