EMC – automatic scanning of results provided in the Peak Table

Hi
A solution that enables automatic scanning of results provided in the Peak Table (via Spike 4.0.13 Analysis Mode -> EMC precompliance -> Peak Table -> Actions -> Scan) is highly useful, as it eliminates the need to manually select multiple results, transfer them to Meter Settings for Quasi-Peak (QP) detector measurements, and then manually add them back to the list.

Unfortunately, the Spike software consistently crashes when choosing ‘Scan’ from the Peak Table -> Actions menu. I have tested this on multiple computers, and the program routinely crashes on all of them. Are you aware of this issue?

I would appreciate it if you could test this functionality on your end and include a fix in the next software release.
Thank you very much
Best regards Miran

[Andrew]

Hi Miran,

I can reproduce. It looks like this issue was introduced in the most recent version. I already have a fix and it should go out in a release next week. I apologize for the inconvenience.

Here’s a link to the previous version if you want a version that should not contain this bug. You will need to uninstall the newer version manually before installing.

https://signalhound.com/sigdownloads/Spike/Spike(x64)_4_0_12.zip

Thanks as always.

• This reply was modified 3 months ago by Andrew.

Hello
Thank you very much for your quick response and confirmation of the problem. Best regards from Slovenia

[Author]

Posts