Calibration software for SA and TG

Hi Sir,

How can we obtain the calibration software for SA and TG?

Thank you.

Regards,
Mervin

Hello Mervin,

There are several ways to calibrate the SA44B.

We provide calibration software to the user. You will need several pieces of equipment to perform the test, and you can find the required equipment list in the calibration manual. Both the software and manual can be found on the SA downloads page under “calibration software”.
https://signalhound.com/support/product-downloads/sa44b-sa124b-downloads/

There are also facilities that will calibrate the SA44B with various accreditations. We provide a list of facilities on this page,
https://signalhound.com/support/spectrum-analyzer-calibration-services/

And finally, you can send the unit back to us for calibration. You can set up a calibration through our facilities by contacting us by phone or email at lori at signalhound dot com.

As for the TG, the only calibration available is through our facilities.

Let us know if you have further questions.

Regards,
A.J.

HI Andrew,
How about calibration for VSG25A.
I dont want to use the filed calibration software.
If i can send the unit back to you, will you be able perform calibration for VSG25A . Please let me know ..

Hello Ganesh,

Yes, we can perform a calibration of the VSG25A. The cost of calibration is 150 USD (I think). You can call us at 1-800-260-TEST to set up a calibration, or send an email to lori@signalhound.com.

Let me know if you have additional questions.

Regards

[Author]

Posts