jraymondParticipantjraymond September 9, 2020 at 8:43 pm
I’m trying to use my BB60C with HDSDR v2.80. After copying the DLLs to the HDSDR install directory and starting the software HDSDR report an error, “Hardware not ready”. I’ve tried restarting the BB60C, computer and software but always get the same error. Any suggestions on fixing the issue?
The BB60C seems to work normally with Spike.
AndrewModeratorAndrew September 10, 2020 at 8:31 am
I have heard reports of this as well. We haven’t used or compiled the HDSDR project in a few years. I believe some customers have got this working by recompiling the project against the latest BB60C API. There have been hardware changes since our last HDSDR release such that the newer APIs are needed to interface BB60Cs. You could try dropping in the latest BB60C API to see if that works.
I’m not sure when we will swing back to this project. Maybe some other customers here could make some recommendations.
jraymondParticipantjraymond September 21, 2020 at 11:11 am
Recompiling with the latest libraries did the trick. I used Visual Studio Community Edition 2019.
You must be logged in to reply to this topic.