- terd November 19, 2014 at 11:50 pm
Very good Very Fast Spectrum analyzer
and i Want to monitor their numbers frequently at all vertical lines And want to adjust the to a flat noise floor. Do not want to see the noise floor, swing up and down then full span.
Attachments:You must be logged in to view attached files.
AndrewModeratorAndrew November 20, 2014 at 9:30 am
Hello and thank you for the kind words. Unfortunately, the BB60A does not have a flat noise floor, and there is no way to flatten it without ruining your measurements. This is one of the limitations of the BB60A. If you want to monitor multiple frequencies at once, the software allows you to place up to 6 markers on the screen.
terd November 20, 2014 at 4:58 pm
- This reply was modified 9 years, 3 months ago by terd.
I know how to adjust the noise floor of the hardware is difficult, but if the read noise floor, then it is probably easier to compensate for the display.
Marker ok, but not have Peak search Tracking
Nothing is impossible Tomorrow is better than today.
Philosophy beat competitors.terd November 23, 2014 at 6:52 am
You must be logged in to reply to this topic.