- This topic has 1 reply, 2 voices, and was last updated 8 years, 8 months ago by
.
- Posts
Can you kindly advise whether there is any option/work-around to conduct signal power statistics. Support we are measuring a 20 MHz channel with instantaneous power varying between -20dBm and -60dBm; I would like to calculate the percentage of time the signal is above say -52dBm.
It would be interesting to construct a CDF from the measured signal power. This is especially important to interference assessment.Equipment: BB60C
OS: Windows 7/10 x64Hello ykhaled,
We do not offer this type of plot in our software (CCDF plot). This is something we may offer in the future, but for now we don’t currently have plans for this.
The only work-around I see available is to utilize our programming API to make the measurement in your own application. This would require programming experience as well as the ability to make this calculation with the waveform data from the BB60C.
Let me know if you have additional questions.
Regards,
Andrew
You must be logged in to reply to this topic.