Hi!

The map was not georeferenced.

I simply forgot to enter Map data after loading the previous used map.

On the end I’m happy that this was not big issue.

Thank you for your quick response and Sorry for any inconvenience.

Regards Miran

Hallo Andrew,

Like always I’m very happy for your quick response. I hope really that in some next version of Spike this limitation will remove. Especially if this is just software limitation. At the moment I don’t have problem for waiting for remove this limitation. by the way, I don’t use only SA44B, BB60C I’m also very proud users of SM200A. The development of software Spike is very important. I appreciate that very much. Thank you again and happy new year and merry christmas.

Regards, Miran

Dear Andrew,

Thank you very much to add Spectrogram Preferences.

Best regards, Miran

Hi,

I still wait for possibility to set up min and max value that are showing in the waterfall.

Thank you in advance,
Regards Miran

See (miran March 28, 2018 at 11:06 am)

Hi

I mean current average trace, not reference trace. Whatever. Important is to have possibility to save some result from Phase measurement

Regards, Miran

Hello Andrew,

To have possibility to export reference trace is just fine. That’s what I need. Thank you again.

Regards, Miran

Hi Andrew

Yes, I agree with You. Is still usable. But don’t look nice.
Like a already wrote, this option it’s very useful.

I’m really happy with your product. They are really useful. In many cases I don’t need anymore to use very expensive and heavy spectrum analyzer. To have possibility to connect GPS to spectrum analyzer is just excellent. I have some ideas to improve this option. But not now. I don’t want to be annoying with my comments. 🙂

thank you for your patience.

Regards Miran

Hi,
Yes, I mean a relative frequency limit line. Center frequency is relative. For mask I write only minus and plus frequencies offset from central frequency and level.

Regards, Miran

Hi
If You have already discussion about limit line. What is with relative limit? I don’t find possibility to setup relative limit. After making the mask, I want to use this on any frequency.
I hope I don’t have to big wish.

Regards, Miran

Andrew,

Thank you for the very quick response.

Now I get all GPS information.

The solution: I just change the port from 13 to 2. Is there any limitation for port number (except max 255)?
I also switch in GPS receiver: GSV, and GGA sentences.

Miran

Regards

Dear Adrew

New information!
I just change the port number; from 13 to 2 without any other changes from the last GPS settings and now I get position. “GPS Connectect”.
I dont have Altitude, Sat. in View and SNR.
If you send my all NMEA sentences that are used in the program I can fix that.

Many new GPS receiver received also other satellite. For this reason i recommend also to use also $GNxxx sentences.

Regards Miran

After setting the correct Port number (13) and correct speed (I tray all standard speed) and pressing the button Connect I receive
immediately the message: “Unable to Connect GPS”

I Also change RMC format from $GPRMC (neutral-all satellite not only GPS) to $GPRMC and add some extra sentences. Without success

20:16:01 $GPTXT,01,01,02,u-blox AG – http://www.u-blox.com*50
20:16:01 $GPTXT,01,01,02,HW UBX-M8030 00080000*7E
20:16:01 $GPTXT,01,01,02,ROM CORE 3.01 (107888)*35
20:16:01 $GPTXT,01,01,02,FWVER=SPG 3.01*58
20:16:01 $GPTXT,01,01,02,PROTVER=18.00*0F
20:16:01 $GPTXT,01,01,02,GPS;GLO;GAL;BDS*69
20:16:01 $GPTXT,01,01,02,SBAS;IMES;QZSS*57
20:16:01 $GPTXT,01,01,02,GNSS OTP=GPS;GLO*29
20:16:01 $GPTXT,01,01,02,LLC=FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFD*31
20:16:01 $GPTXT,01,01,02,ANTSUPERV=AC SD PDoS SR*20
20:16:01 $GPTXT,01,01,02,ANTSTATUS=OK*3B
20:16:01 $GPTXT,01,01,02,PF=3FF*55
20:16:08 $GPRMC,201608.00,A,4631.01796,N,01612.11149,E,0.012,,210318,,,A*76
20:16:08 $GPGNS,201608.00,4631.01796,N,01612.11149,E,NN,00,1.20,186.5,41.5,,*73
20:16:08 $GPGGA,201608.00,4631.01796,N,01612.11149,E,1,00,1.20,186.5,M,41.5,M,,*59
20:16:08 $GPGSV,1,1,00*79
20:16:08 $GPZDA,201608.00,21,03,2018,00,00*60
20:16:09 $GPRMC,201609.00,A,4631.01798,N,01612.11146,E,0.031,,210318,,,A*77
20:16:09 $GPGNS,201609.00,4631.01798,N,01612.11146,E,NN,00,1.20,186.4,41.5,,*72
20:16:09 $GPGGA,201609.00,4631.01798,N,01612.11146,E,1,00,1.20,186.4,M,41.5,M,,*58
20:16:09 $GPGSV,1,1,00*79
20:16:09 $GPZDA,201609.00,21,03,2018,00,00*61
20:16:10 $GPRMC,201610.00,A,4631.01798,N,01612.11143,E,0.038,,210318,,,A*73
20:16:10 $GPGNS,201610.00,4631.01798,N,01612.11143,E,NN,00,1.22,186.4,41.5,,*7D
20:16:10 $GPGGA,201610.00,4631.01798,N,01612.11143,E,1,00,1.22,186.4,M,41.5,M,,*57
20:16:10 $GPGSV,1,1,00*79
20:16:10 $GPZDA,201610.00,21,03,2018,00,00*69
20:16:11 $GPRMC,201611.00,A,4631.01797,N,01612.11142,E,0.036,,210318,,,A*72
20:16:11 $GPGNS,201611.00,4631.01797,N,01612.11142,E,NN,00,1.20,186.3,41.5,,*77
20:16:11 $GPGGA,201611.00,4631.01797,N,01612.11142,E,1,00,1.20,186.3,M,41.5,M,,*5D
20:16:11 $GPGSV,1,1,00*79
is repeated

Please send me all NMEA sentences that are used in the program.

thank you for helping me!

Regards, Miran

Hello Andrew,
Thank you for quick response and for accepting my suggestion.

I like to share with you…..
This Year, in Slovenia, we have celebrated 40 Years of first Radio Monitoring Station – Jeruzalem. For this purpose I have made a short movie to show my coworkers what we do in our department.

I’m sure that you will find the video useful also for you and that you will recognise some of equipment in the movie. 🙂

Please take this video as homemade is not proffesional. The file size is about 1,6 GB. It is in Englisch.

Below is the link where you can download the video until next week:

http://vozlic.com:5000/sharing/MPbNiQsG1

With best regards, Miran

[Author]

Posts