- This topic has 1 reply, 2 voices, and was last updated 2 years, 10 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
- Posts
Let me know whether we can get (0-10 Vpeak) output of sine wave from the VSG25A. Hope max amplitude is mentioned as +10 dBm.
If not available let me know the available peak-peak voltage range output of the VSG25A.
Into a 50 ohm load, +10 dBm is about 1 V(peak), or 2Vpp. You would probably want a 1-2 watt amplifier with >20 dB of gain if you need 10 V(peak). You would probably also want to filter out harmonics before and maybe after amplifying to make it a good sinusoid.
Viewing 2 posts - 1 through 2 (of 2 total)
You must be logged in to reply to this topic.