Phase noise – result exporting

Hi,
Phase noise – Trace settings -_Exporting data doesn’t work?

After exporting under Trace Settings I get file without data.
How to export reference trace, result?

I use Spike version:3.1.14

BR Miran

Attachments:

You must be logged in to view attached files.

Hello Miran,

I was able to reproduce the export issue. I will look into this and get a fix for the next release.

Currently there is no way to export the reference trace. The export button will export the current average trace.

Thanks for the bug report. It is always appreciated.

Regards,

Hello Andrew,

To have possibility to export reference trace is just fine. That’s what I need. Thank you again.

Regards, Miran

Hi

I mean current average trace, not reference trace. Whatever. Important is to have possibility to save some result from Phase measurement

Regards, Miran

I think the recent fix for this PN export issue still has a problem:

The frequency offset values in first column of the exported CSV are all a factor of 10e4 too small if the sweep is from 1kHz -> 1MHz.
If the sweep is from 100Hz -> 1MHz they are all a factor of 10e5 too small.
If the sweep is from 10Hz -> 1MHz they are all a factor of 10e6 too small.

Attachments:

You must be logged in to view attached files.

Hi Hendorog,

Good catch! Definitely a bug, and I can get it out for the next release.

As always, thanks for the feedback, it is much appreciated.

Regards,
Andrew

[Author]

Posts