- This topic has 1 reply, 2 voices, and was last updated 10 years, 5 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
- Posts
Hello.
Are there any plans to include automatic peak markers within Spike as shown in attached .jpg?
Thanks.
Hey Jyaron,
There is no immediate plans to include this type of functionality, but in the near future we will be addressing a number of EMI/EMC type measurements and peak tables is one we will likely be adding. This looks to be a very similar type functionality.
Regards,
A.J.
Viewing 2 posts - 1 through 2 (of 2 total)
You must be logged in to reply to this topic.