- This topic has 1 reply, 2 voices, and was last updated 2 years, 3 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
- Posts
I am considering acquiring an SM435. However I would like to allow support for my plethora of N and SMA connector cabling when doing the bulk of my work at < 20GHz. What are the best methods/adapters to use to attach SMA/N cabling to the 2.4mm connector on the SM435 SAs? Thanks.
You could adapt from 2.4 to 3.5/2.92 which would give you the option to connect 2.92, 3.5, and SMA and go > 20GHz when needed. Since that adapter will be expensive, you could buy a cheaper connector saver, like SMA-SMA or 3.5-SMA if you plan on doing a lot of SMA mating cycles.
2.4 to N exists and isn’t horribly expensive,
Here’s some ideas,
Viewing 2 posts - 1 through 2 (of 2 total)
You must be logged in to reply to this topic.