- This topic has 3 replies, 4 voices, and was last updated 2 years, 6 months ago by
.
- Posts
Hello,
I need to generate the Chirp Modulation Signal for our LoRa based device conductive sensitivity verification testdetails attached for your reference.
Is it possible using Arb mode od VSG25/60.
Kindly adviceBoth devices have an Arb mode, but the VSG25 is limited to 2k symbols (very small buffer). It looks like these chirps are often clustered together in a sequence, and never wider than about a MHz, so the VSG60A would be the right choice, since its buffer is on the PC/laptop and can be very large if needed.
Dear Sir,
I am Sagar Mistry from System Level Solutions(India)Pvt Ltd.
I need to generate the Chirp modulated signal for Lora Conductive Sensitivity testing purposes inside the lab using VSG25A.
Please find the attached image for more reference regarding the specification of the chirp modulated signal need to generate using VSG25A.
Request you to guide me regarding the necessary steps or configurations needed to perform in VSG25A.
Hope to hear from you at the earliest.
Thanks and Regards,
Sagar Mistry
RF Engineer IV
Product Design Group
Skype Id:sls.sagar.332
Mo:+91 7567552981
System Level Solution (India) Pvt. Ltd.
http://www.slscorp.comUnfortunately, we are not familiar with the LoRa specification and do not have any resources to help you with your task.
You must be logged in to reply to this topic.