- This topic has 1 reply, 2 voices, and was last updated 4 years, 5 months ago by
.
- Posts
Gentlemen,
After recording and parsing the sweep file, I’m getting the following output:
Sweep Count:58
Sweep Size:1302
Sweep Start Freq:1221991028.266361
Sweep Bin Size:7692.299638
Sweep Freq Range:1222.000000MHz to 1232.000000
RBW:30.000000kHz
VBW:30.000000kHz
Reference Level:-64.000000dBm
Averaged 1 trace(s) per output trace
Was not channelized
Sweep 0 Peek Freq 1227.121792 Mhz Peak Ampl -70.608009dBm
Sweep 1 Peek Freq 1226.967946 Mhz Peak Ampl -70.720123dBm
Sweep 2 Peek Freq 1226.821792 Mhz Peak Ampl -70.500725dBm
Sweep 3 Peek Freq 1227.006408 Mhz Peak Ampl -70.614006dBm
…….My question is: Is it possible to record the whole sweep (frequency point/amplitude), not only the peak value at given frequency?
Best regards,
PeterPeter,
The entire sweep is stored in the recording file. The example you are running simply finds and prints off the peak amplitude point in each sweep. You will need to modify the program if you want to do something different with the data.
Regards,
Andrew
You must be logged in to reply to this topic.