- This topic has 1 reply, 2 voices, and was last updated 5 years, 4 months ago by
.
- Posts
Im working with LoRaWAN Signal using Chirp spread spectrum(CSS) Modulation Technique.
I would like to demodulate the LoRa signal using SA44B. LoRa Signal bandwidths is 125KHz, 250KHz and 500KHz & sampling rate around 50KHz to 100KHz.
I was aware that BB60C can able to demodulate LoRa since the real-time bandwidth is higher than the LoRa bandwidth.
We understand that CSS varies the frequency with time so Analog demodulation /zero span mode Is used to view the LoRa modulation.
Can you please confirm Whether our SA44B is compatible to demodulate LoRa signal in the bandwidth of 125KHz, 250KHz & 500KHz, if so what settings should I set in my Spike Software.
Sarath,
The Spike software does not have LoRa demodulation capabilities. You would need to use either a third party software platform that supports LoRa measurements (I am not aware of one) or use the API to retrieve the I/Q data and perform the measurement yourself. Additionally, the bandwidth of the SA44B is 250kHz, so you would at least have the bandwidth necessary for the 125 and 250kHz waveforms. I am not familiar with the LoRa standard and am not able to tell you if the SA44B is adequate for LoRa demodulation.
Regards,
Andrew
You must be logged in to reply to this topic.