- This topic has 2 replies, 2 voices, and was last updated 5 years, 10 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
- Posts
Hi, currently, I’m working with a BB60C spectrum analyzer on windows, but my final goal is to connect it to a Raspberry Pi 3 B+ a measure a bandwidth of approximately 2 GHz.
I followed the procedure to configure the BB60C for ARMv7 system, however, when I connect the signal hound to the Raspberry Pi is not recognized by it.
Can you please help me with this?Best Regards
Jorge Gomez
Hello Jolugome,
The BB60C is not compatible with the RPi. It is only compatible with x86 systems (Linux (API only) or Windows). We had support for running the SA44 on the RPi2 in the past, but no longer support this API due to USB throughput limitations.
Regards,
Andrew
Viewing 3 posts - 1 through 3 (of 3 total)
You must be logged in to reply to this topic.