[gkang]

Hi Justin & Andrew,
I have a similar job to do. What I want to try is that I need to measure the feedback time of signal produced by the signal generator controlled by in-house code through the signal analyser. I give a series of bursts whose frequency is 250 kHz for 20 ms and burst period is 500 ms. Once the signal goes into the signal analyser, the power at 250 kHz is shown periodically. Basically, I want to detect the time at which the power of the signal at 250 kHz is shown after the signal is generated by the signal generator. Would it be possible to do this with the BB60C or SM200, SDK provided by signal hound, and additional code for channel power calculation?

Thanks.

• This reply was modified 4 years, 3 months ago by gkang.

[Author]

Posts