SPIKE don`t working correctly

After a windows update, I lost a serie of USB devices included the SA and TG. I did a lot of attempt to solve the problems. Because my restore function was also inop, I was forced to recover the windows. After the windows recover I reload the drivers and SPIKE, I had a serie of problems with the reconize of the SA and TG, but solved this. Now my SA is reconized and connecte to SPIKE, but it don`t work correctly as you can see in the picture atached. Under default starting,It sweep, (in the picture is around half sweep) but with full disply color and not a trace. If I lower the span to a few KHz apears a serial of vertical traces (second photo). It seems some problem with the calibration files, that was lost in the recovery operation. I finded the cal files in “windows old” and put them inside of signal hound directory (c:windows/program/signal hound) but nothing changed. I do something wrong! Can you help me? thanks in advance.
Carlos Mourato

Attachments:

You must be logged in to view attached files.

Hello Carlos,

Thank you for emailing us as well. We will continue to work through your issues via email.

Regards,
Andrew

Problem solved after I reinstalled the cal file in the hiden directory, according to instructions given by SH support! Thanks Roger!

[Author]

Posts