- This topic has 1 reply, 2 voices, and was last updated 3 years, 2 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
- Posts
Hi guys,
I need some advice..
I have been using my SA44B in the field for a while now doing satellite installations and it has been performing great! however recently i have noticed it has been out by about 20db, I did a self test and the results were not good.. I always use a DC block and never have any input over -25dB.. is this toasted? or can it be repaired/ re-calibratedIf you double check your cables and connectors, and everything looks good, I would recommend requesting an RMA from service (at) signalhound.com. We can take a look at it and let you know what we find.
Viewing 2 posts - 1 through 2 (of 2 total)
You must be logged in to reply to this topic.
