HELP

hello!
i want to control bb60c with LABview
can you help me?

i need the example vi to control bb60c spectrum analyzer

Hello mehran,

We are working on Labview vi’s right now for our products. These files should be available in the next couple of weeks. If you cannot wait for us to deliver this, then consider using the example vi project we distribute in the API download folder. The vi project can be found in the sa_series examples. The API for the SA44/SA124 is very similar to the BB60C API and you should be able to convert this project to the BB60C API in short time.

Regards,
Andrew

Thanks Andrew
I’m trying to communicate with devices so far faile and I am waiting for your workو
I hope that before you conclude the project

Regards,
Mehran

dear Andrew
i test the BB60C with attached vi but no result Achieved.
can you Check the my vi and help me?

Regards,
Mehran

Hello Mehran,

I apologize that you are having issues.
Lets wait another week or two and we will release some .vi’s and examples that should help you get going. This will be part of our API download SDK once released. Check back in a couple weeks.

In the meantime, someone on the forums may be willing to help you out with your Labview issues. The only tips I can provide is to look at our existing SA API example for Labview. Also check out the BB60 API C examples which show how to use the API.

Regards,
Andrew

What version of Labview are you using?

Do you have a specific question? You may want to upload your code that you are having problems with.

If you are just looking for a general idea how to do it, the SA example is where I started. API manual is good enough. I really have not seen too many problems that were not related to lack of sleep.

[Author]

Posts