Forum Replies Created
- AuthorPosts
davorinParticipantMaybe as an example….the first Picture Shows the end of the Transmission…so it triggered more than once…
And this Picture triggered correctly…
Attachments:
You must be logged in to view attached files.
davorinParticipantHello A.J (o;
Okay…thanks….talking about Trigger….
seems when I start the single cycle with Trigger activated, it doesn’t Trigger once if the Signal won’t fit into the sweep time…so many times I see only the end captured…But I will try now anyway to record it and see if I can find a suitable Software for graphing the binary or CSV data…
davorinParticipantOkay, thanks 🙂
So no danger when connecting it to DC causing some spikes to damage the input. Guess the attenuator is then needed for this.
davorinParticipantThanks for the great explanation 🙂
Still many RF stuff is new to me…..although I learned repairing radio/tv sets 30 years ago (o;
Will the Smith chart feature coming back to Spike software?
davorinParticipantdavorin June 4, 2015 at 6:49 am in reply to: Missing character with Spike 3.08 on VMWare Fusion 7.1.1Ah right…the disconnects appeared as well on my Macbook….
Happened when VMWare wasn’t in the foreground….guess otherwise it can’t keep up with the USB data stream….
davorinParticipantdavorin June 3, 2015 at 12:06 pm in reply to: Missing character with Spike 3.08 on VMWare Fusion 7.1.1Hello A.J.
My intention is to use the SA44B locally with an Intel NUC i5 machine running Win8.1 Pro….so only occasionally I would take it with me with my Macbook…
Just wanted to note that behavior if it wasn’t detected upfront…
Tomorrow I will do some more testing with this great device….as I finally took it home to my lab where it belongs 😉
cheers
richard- AuthorPosts