Forums › SM Series Discussions › SM4335B
- This topic has 1 reply, 2 voices, and was last updated 1 month, 2 weeks ago by Justin Crooks.
AKumarParticipantAKumar February 8, 2023 at 10:38 pm
let me know whether the below measurements are possible using SM435B or SM435C.
Pulse Measurement Analysis : FM linear chirp, frequency hopping and pulsed radar signals, Modulation Analysis in pulses with CW, linear FM, triangular FM and Barker code, comprehensive result table with all key performance indicators, Statistics data analysis in tabular metrics, trend line and histogram etc.
Justin CrooksModeratorJustin Crooks February 9, 2023 at 10:18 am
Pulses can be measured using markers in “zero span” mode. Resolution is about 5 nanoseconds.
FM linear chirp / triangular FM can also be viewed and measured using markers in zero span, up to 160 MHz bandwidth
Frequency hopping and pulsed radar: either real-time mode or zero span, depending on the metrics you need.
Barker code: We have wifi tools but no radar tools.
Comprehensive result table: no.
For radar-specific analysis, our hardware plus Sceptre software from 3 dB Labs is a go-to for a lot of people.
You must be logged in to reply to this topic.