Export Data

I use VSG25 and BB60C as a spectrum analyzer. I am interested in saving or exporting in some way the data I receive on the BB60C so that later I can decode the data into bits of ‘0’ and ‘1’ and compare to the bits I transmitted, and from that arrive at a BER calculation. What is the best way to do this?

Matan,

Using SCPI, you can retrieve the demodulated bit string. This would return a string of ‘0’s and ‘1’s from the Spike software measurement. This is using the :FETCh:DDEMod? command. You can learn about our SCPI commands and see SCPI examples by downloading our SDK here, https://signalhound.com/software/signal-hound-software-development-kit-sdk/

[Author]

Posts