Search Results for 'api'

[thientran]

Hello!
I have 1 SA44B and I want to use it to measure the amplitude of the signal at the center frequency.
I used the function (in the API):
SA44B_Device.SHAPI_RunMeasurementReceiver(ref myMeasRcvr);
AmpliFreqCenter = myMeasRcvr.RFAmplitude .
The data receiving speed is very slow (about 500 ms / 1 sample). How to improve the speed?
Thank!

• This topic was modified 5 years, 6 months ago by thientran.

We have developed a C# application that uses the SA device API.

We see that the same application, connected to the same device, has very different performance on 2 PC with the same hardware (Intel Core I7).
On the first PC the saGetSweep_64f call takes 200ms to return the data.
On the second PC the saGetSweep_64f call takes 400ms to return the data.

Is there any reason for this behavior?

Thanks,
Filippo

[Andrew]

We don’t provide any BER testing capabilities. One could use our APIs to manually perform BER testing. EVM measurements are sometimes used as an alternative/approximation to BER testing. We don’t have resources for doing this.

Regards,
Andrew

[kaiser]

Upon further investigation, you can change the sm_api.cs to just be like:

[DllImport("sm_api", CallingConvention = CallingConvention.Cdecl)]
    public static extern SmStatus smGetDeviceList(int[] serials, ref int deviceCount);
    [DllImport("sm_api", CallingConvention = CallingConvention.Cdecl)]

Then if you’re on Linux, it looks for sm_api.so, libsm_api.so and on windows it looks for sm_api.dll

Nice little benefit for interoperability. If you need to specify x64, x64 and other arch’s, you’ll probably need to SetDllDirectory or LoadLibrary with a dynamically added name, or a custom build step to rename the proper dll and put it with the assembly. DllImport only can do so much matching.

[kaiser]

[StructLayout(LayoutKind.Sequential)]
public struct SmGPIOStep
{

public double freq;
public Byte mask; // gpio bits

public SmGPIOStep(double f, Byte m)
{
this.freq = f;
this.mask = m;
}
}

[DllImport(“sm_api.dll”, CallingConvention = CallingConvention.Cdecl)]
public static extern SmStatus smSetGPIOSweep(int device,[In, Out]SmGPIOStep[] steps, int stepCount);

I just downloaded the latest API, and was running it against some of my code. I had to edit the sm_api.cs again to add this in, so that I could set up GPIO Sweeps from C#. It seems to work great again. This is the 3rd project where I’ve had to make this edit, as suggested here. Is there any reason why this bugfix hasn’t been included in the sm_api.cs file yet?

Really more of an FYI if anything.

I had a Windows C# application that we used for initial development of some algorithms and functionality for a customer. It worked quite well.

Then another customer required CentOS Linux. We re-wrote the application in C++, which was fine. It worked. We were sad to see many of the niceties of C# fade away, but there’s nothing wrong with C++, if you’re used to it.

We now had a need to harmonize code-bases, as we started implementing features moving forward.

Was playing with .Net Core 3.0 preview for Linux / Windows, and decided to try and get our C# code running on Linux. So we set up a CentOS 7 box, got everything installed nominally. Created a .Net Core 3.0 application, and then in the sm_api.cs (in the windows examples directory), merely replaced all “sm_api.dll” with “sm_api.so”, and it just worked.

So to anyone out there wondering if this is possible, or how well it works, or how to do it, or what they should do for cross-platform development, I’d heavily recommend .Net Core. VS Code can SSH into multiple remote computers either Linux or Windows, remote develop/build/debug and it works great. You can also deploy the same application via docker, and so on. In fact, the debugger works much better with respect to pausing the SM200’s queued captures and then re-starting than gdb ever did.

Enjoy all, and good job Signal Hound team!

[LVXICHEN]

Andrew，Thank you for your reply。Due to the limitation of using environment, we can only use ARM hardware platform，Does SA44B support this use? Why don’t you support API on ARM now? Is it due to fewer users or to technical reasons? What will happen if we connect SA44B on ARM Corex-A8?
We look forward to your reply！

[Andrew]

Hello,

As you’ve noticed, the SA44B ARM packages in the SDK are located in the “obsolete” folder. This is because we have obsoleted/deprecated these versions of our APIs and no longer support them. We recommend Windows only due to the limitations which you can read about in this thread.

Regards,
Andrew

[LVXICHEN]

Hello，I want to connect with SA44b on the ARM Cortex-A8 hardware platform, and get the transmitting power and frequency of wireless devices through API interface function，Can I use it this way? Are the packages of”arm_sa44B_api.zip” provided on your website fully tested and ready to use?
The File of “arm_sa44B_api.zip”is Under “Signal_hound_sdk_07_15_19-SDK” Software Development Suite Compression Package

[Andrew]

Our APIs are not open source. Additionally, the FTDI library is only used in the BB60 API for the tracking generation compatibility. The BB60C itself uses libusb for USB 3.0 communication. The BB60C has a complex and proprietary protocol that we do not publish.

Regards,
Andrew

[asvol]

Thank for your answer. May be you can give us source code bb_api library. We can try to compile your library for ARM. Or maybe you can explain how to get raw IQ data from device throug ftdi without using your library. We use your device for fly on drones and we didn’t want use x86 compatible PC, because it’s too greedy for power.

Hello.
We have device BB60C Spectrum analzer and we want use it with Raspberry PI 4 with ARM CPU arhitecture. Can you build libbb_api.so and libftd2xx.so files for this platform.

[Gary]

UPDATE: SUCCESS! Turned out I needed to load “swig” (available in Software Manager). Once I did that, then went through the process from “cmake ..” on down, I opened GRC, ran the flowgraph, and it worked!

Once I summarize my notes (they’re, uh, kinda messy), I’ll post another thread explaining how I did it.

Thanks, again!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Long story short: I had tried to install Gnu Radio from source and with Pybombs, both of which gave me more errors than did the BB60C “cmake..” command. I followed your links and the answer was to install “gnuradio-dev”.
However, even with that, I kept getting:

/sbin/ldconfig.real: /usr/local/lib/libftd2xx.so is not a symbolic link

/sbin/ldconfig.real: /usr/local/lib/libbb_api.so.4 is not a symbolic link

after the “sudo ldconfig” command.

I thought it might still work, so I opened Gnu Radio Companion and added the “BB60C: IQ Source”. However, when I attempted to run the simple flowgraph (it was simply attached to a frequency sink to look at the spectrum), I got the following errors in GRC:

Generating: '/home/gary/gnuradio/bb60SpectrumAnalyzer.py'
>>> Warning: This flow graph may not have flow control: no audio or RF hardware blocks found. Add a Misc->Throttle block to your flow graph to avoid CPU congestion.

Executing: /usr/bin/python -u /home/gary/gnuradio/bb60SpectrumAnalyzer.py

Warning: failed to XInitThreads()
qt5ct: using qt5ct plugin
Traceback (most recent call last):
  File "/home/gary/gnuradio/bb60SpectrumAnalyzer.py", line 156, in <module>
    main()
  File "/home/gary/gnuradio/bb60SpectrumAnalyzer.py", line 144, in main
    tb = top_block_cls()
  File "/home/gary/gnuradio/bb60SpectrumAnalyzer.py", line 116, in __init__
    self.bb60c_source_0 = bb60c.source(1e9, -20, -1, -1, 2, samp_rate, False, False, 0, 0)
AttributeError: 'module' object has no attribute 'source'
inotify_add_watch("/home/gary/.config/qt5ct") failed: "No such file or directory"

I don’t know if those two issues are related.

Thank you for the help. I think I’m pretty close to making this work. Once I do, I’ll do a short write-up explaining to others how I got it to work in Mint 19.1.

• This reply was modified 5 years, 10 months ago by Gary.

Hello,

I’m working with a SA44B using the API in Python. I’m able to utilize the API just as I would have anticipated.
The issue I’m having is that the “min” and “max” arrays values don’t correspond to dBm as I would have suspected. The values do follow the level as expected, but not the values. An example is attached.

Is there a function to convert these values to dBm?
Perhaps it has to do with the way that I instantiate the two arrays? This is the code I’m using to create the min/max arrays before calling the saGetSweep method, where swlen is the length of the sweep

        pyarr = [x for x in range(swlen.value)]
        arr = (ct.c_int * len(pyarr))(*pyarr)
        arr2 = (ct.c_int * len(pyarr))(*pyarr)
        min_pointer = ct.pointer(arr)
        max_pointer = ct.pointer(arr2)
        res = self.sa.saGetSweep_32f(self.deviceHandle, min_pointer, max_pointer)

Attachments:

You must be logged in to view attached files.

[Andrew]

Hello Jolugome,

The BB60C is not compatible with the RPi. It is only compatible with x86 systems (Linux (API only) or Windows). We had support for running the SA44 on the RPi2 in the past, but no longer support this API due to USB throughput limitations.

Regards,
Andrew

[tuantuanlee]

Is there any special processing for 4096 32-bit floating point data before play it by the Windows waveout API？

[tuantuanlee]

Thanks!

I have called the Windows waveout API.
My program can play the audio file recorded by Spike now.
But,it can’t play the audio data retrieved by bbFetchAudio.

[Andrew]

Hello tuantuanlee,

You will need to use some sort of system audio API to play sound. We use the Windows waveout API in Spike to play audio, but there are many options.

Regards,
Andrew

[tuantuanlee]

I have retrieved 4096 32-bit floating point data by calling bbFetchAudio(FM mode), but i don’t know how to play the audio data in my program.

• This topic was modified 5 years, 11 months ago by tuantuanlee.

[Andrew]

To ensure the least amount of data loss over USB elevating the thread priority is the best(only?) way we have found to do this. As far as I know root privilege is required for this on Linux (not the case on Windows).

With multiple devices actively making measurements, you will experience data loss if this isn’t done.

I had another customer do a bit of testing with niceness levels and it never resulted in an adequate solution. (His processing would still swamp the CPU and cause data loss events while I/Q streaming despite using niceness levels and despite pulling his processing out into separate processes.)

Below is the snippet we use to do this. You are free to play around and determine if one of your solutions will work. The result of the pthread_setschedparam() will indicate when it fails due to privilege issues. We don’t push this status back out to the user, but I have a request to in a future update. That way the user can ensure the API is setting the proper priority. The API doesn’t check (or care) if it fails at the moment.

void ElevateThreadPriority(std::thread &t)
{
pthread_t this_thread = (pthread_t)t.native_handle();

struct sched_param params;
int tp = 10;
params.sched_priority = tp;

int res = pthread_setschedparam(this_thread, SCHED_FIFO, &params);
}

• This reply was modified 6 years ago by Andrew.
• This reply was modified 6 years ago by Andrew.