- This topic has 5 replies, 4 voices, and was last updated 5 months, 1 week ago by
.
- Posts
Hi,
I am using a BB60C and its working well with the Spike SW. But when using the LabVIEW examples, I keep getting the “Device not open” error when running the vi. I re-loaded the bb_api-64.dll driver from the LabVIEW drivers download (and deleted the -64 text) and restarted by PC and got the vi to work once. After the second time using the vi I get the same error. Any suggestions on how to fix this? Is there a different dll available? Any help is appreciated. Thanks!!Tom,
We will be responding to these questions from our support email, thanks.
Hi,
I am using a BB60C and its working well with the Spike SW. But when using the LabVIEW examples, I keep getting the “Device not open” error when running the vi. I re-loaded the bb_api-64.dll driver from the LabVIEW drivers download (and deleted the -64 text) and restarted by PC and got the vi to work once.Any help is appreciated. Thanks!!If you are using the LabVIEW bindings, and an error is returned, say because Spike was opened, then most likely LabVIEW will need to be restarted and the device power-cycled. Otherwise resources may not be cleaned up properly within the LabVIEW environment, causing errors when trying to connect to the device again.
again its same error of “Device not open” is keep coming as even I uninstalled spike for while.
You must be logged in to reply to this topic.