Suggestion to Improve Span Measurements
I noted that, when entering a span in Spike, I get a different measurement when I actually put cursors on each end. See the attached image. The difference appears to be exactly one bin. As I understand it, you’re using a set number of points based on the bin width. I have a span of …
Flag overloaded traces in Spike files?
Would it be possible to add a flag in the .shr files that indicates that an “Uncal/IF overload” condition existed for a given sweep? I perform offline processing of data and could use the flag to ignore any sweeps that were acquired during overload. Also, without the flag, when playing back previously recorded data in …
IQ file epochnanos
Dear Signal Hound, We mainly use our BB60C as a mobile RF recorder, and link a given chunk of IQ data to GPS position in the real world via time. We are (or would like to) use the epochnanos entry of the XML file to do this. Very frequently (in fact, all the time as …
SA 44 and TG 44 on Max Book with Bootcamp?
Hello Hans anyone tested Spike with SA44/TG44 on a Mac Book with Windows 10 running (Native mode over Bootcamp)? I like to buy a Mac Book Air for some other reasons and travelling with two computers is boring… Thanks Markus
SA44 (old ? )
Hi all. I bought a SA44 (not a SA44B) and I do not know if the Spike software can be used as a SA44B. Can someone tell me what are the differences between the two devices? . Thank you very much
Conduct signal level statistics using Spike
Can you kindly advise whether there is any option/work-around to conduct signal power statistics. Support we are measuring a 20 MHz channel with instantaneous power varying between -20dBm and -60dBm; I would like to calculate the percentage of time the signal is above say -52dBm. It would be interesting to construct a CDF from the …
Problems with Spectrogram of the Software Spike
Please find document in attachment. Claudio Re
Spike – auto peak search
Hello! Please, realize auto peak search in Spike! It’s very usefull. It can be adjustable for N max peaks, where N is from 1 to 10 or more. Best wishes, Nikita
Spike crashes immediately after opening in WIN 7 -32bit
The “connecting devie..” box comes up, the program screen comes up regularely, but immediately crashes ” The program has stopped working…” The details are Nome modulo con errori: OPENGL32.dll Versione modulo con errori: 6.1.7600.16385 Timestamp modulo con errori: 4a5bdadb Codice eccezione: c0000005 Offset eccezione: 00025d5a Versione SO: 6.1.7601.2.1.0.256.1 As far as I understood the problem …
SA44B – "Device not found" error, another possible solution
Hi. I just want to share my recent experience with “Device not found” error in Spike software. After some time I got back to a computer with 32-bit Win7 that I was using a few months ago together with SA44B with no problems at all. But at this time the Spike SW started reporting “device …