Firmware Updater 9/2/2022
* SM200A Version 4.5.10
* SM200B Version 4.8.14
* SM200C Version 9.9.7
* SM435B Version 2.4.4
* SM435C Version 3.3.4

Version descriptions below

***************
SM435C
***************

SM435C Version 3.3.4 (9/2/2022)
* Initial release

***************
SM435B
***************

SM435B Version 2.4.4 (6/9/2022)
* No new functionality
* Support for hardware revision only.

SM435B Version 2.2.2 (4/15/2022)
* Initial release

***************
SM200C
***************

SM200C Version 9.9.7 (6/9/2022)
* No functionality added.
* Support for hardware revision only.

SM200C Version 8.8.6 (1/25/2022)
* No functionality added.
* Support for hardware revision only.

SM200C Version 7.7.5 (4/12/2021)
* Adds video trigger capability to the full band I/Q captures. Additionally, adds
  a configurable trigger timeout to both video and external triggered full band captures.
* New functionality is only available with SM200 API version 2.1.12 or newer.
* See SM200 API manual for more information.

SM200C Version 6.6.4 (10/30/2020)
* Enables GPS write capabilities. 
  Write custom UBX messages to the on-board GPS through the API.
* See API manual for more information.

SM200C Version 5.5.3 (7/20/2020)
* Fixed issue where the first several samples after the LO changes were invalid. 
  This issue affected sweeps with large (>= 1MHz) RBWs and I/Q streaming after changing frequency. 

SM200C Version 4.4.2 (6/1/2020)
* Bug fix for 1THz sweep speeds. Pair with Spike 3.5.4 (or newer) or SM_API version 2.1.4 (or newer).

SM200C Version 3.3.1 (4/3/2020)
* Initial release build
* Bug fix: Fixed non-volatile UDP network configuation writes.

SM200C Version 1.1.1 (3/23/2020)
* Prototype build

***************
SM200B
***************

SM200B Version 4.8.14 (6/9/2022)
* No functionality added.
* Support for hardware revision only.

SM200B Version 4.5.14 (1/25/2022)
* No functionality added.
* Support for hardware revision only.

SM200B Version 4.5.13 (10/30/2020)
* Enables GPS write capabilities. 
  Write custom UBX messages to the on-board GPS through the API.
* See API manual for more information.

SM200B Version 4.5.12 (2/5/2020)
* GPS timestamping improvements
  - Improved timestamp stability when GPS disciplined over long I/Q captures.
  - Improved GPS lock status for better reporting GPS disciplined status. 
  - Works with API version 2.0.3 or greater.

SM200B Version 4.5.11 (9/25/2019)
* Adds LTE I/Q streaming sample rates.
  - 61.44MS/s base sample rate decimated by powers of two.
  - Requires API version 2.0.2 or Spike version 3.4.1 to use the new ratess.

SM200B Version 4.5.10 (9/9/2019)
* Initial release

***************
SM200A
***************

SM200A Version 4.5.10 (10/30/2020)
* Enables GPS write capabilities. 
  Write custom UBX messages to the on-board GPS through the API.
* See API manual for more information.

SM200A Version 4.5.9 (2/5/2020)
* GPS timestamping improvements
  - Improved timestamp stability when GPS disciplined over long I/Q captures.
  - Improved GPS lock status for better reporting GPS disciplined status. 
  - Works with API version 2.0.3 or greater.

SM200A Version 4.5.8 (9/25/2019)
* Adds LTE I/Q streaming sample rates.
  - 61.44MS/s base sample rate decimated by powers of two.
  - Requires API version 2.0.2 or Spike version 3.4.1 to use the new ratess.

SM200A Version 4.5.6 (12/5/2018)
* Improved repeatability on external trigger timings in IQ acquisition.
* If upgrading to 4.5.6 
**  Spike version 3.2.4 or newer must be used.
**  API version 1.1.4 or newer must be used.

SM200A Version 4.5.5 (9/14/2018)
* Improved USB reliability on newer Windows 10 machines. 
* If upgrading to 4.5.5 
**  Spike version 3.2.4 or newer must be used.
**  API version 1.1.4 or newer must be used.

SM200A Version 4.4.4
* Official release